Vertical Ultrasonic Terminal Welding Machine 50mm² Wire Welder

Ultrasonic terminal welding machine use ultrasonic frequency vibration principle to change ultrasonic vibration energy into friction energy and transfer to the metal surface to be welded ,while the friction produces heat under the pressure, the metal structure of molecules fully activation of the fusion between the molecular layer of the formation of the new equipment.This welding method is suitable for wires and various electronic components,connectors,terminals and contacts welding.

• Wire welding has no loose wire phenomenon, good conductiv-ity after welding, extremely low resistivity or close to zero;
• Equipped with high-performance ultrasonic metal spot weld-ing power supply, automatically tracking the frequency of thetransducer, with two control modes of time and energy;
• Ultrasonic welding has low requirements on the metal surface,no need to scrape the oxide layer or electroplating layer, and thewelding efficiency and quality are high;
• The welding material does not need to be melted, does notchange the material characteristics, and has no pollution;
• Can realize the welding between different metal materials, suchas nickel + copper, copper + aluminum, nickel + aluminum, etc.;
• The welding time is short, without any flux, shielding gas andfiller;
• Online Connectivity Function: The MES system can recognize and collect data such as the welding output power, weld-ing stroke, and welding time for each welding cycle (connect-ing to the MES system requires prior customization of the in-tegration system);
• Self-Inspection Function: The equipment can automaticallygenerate quality monitoring records through the quality con-trol function. It detects whether the product meets the requiredwelding quality standards for each welding cycle by monitor-ing output power, welding time, welding energy, etc. In caseof any anomalies, the system will trigger an alarm and stop themachine.

Mode	XW-T2060	XW-T2080
Input Voltage	AC 220V±10%V 50/60Hz	AC 380V±10%V 50/60Hz
Power	6000W	8000W
Frequency	20KHZ
Control Mode	with air supply 0.3-0.6Mpa
Generator Type	1. Three type mode, Time Energy/ Power 2. Digital automatic frequency tracking, generator can be adjusted the output amplitude from 0% to 100% 3.Welding curve display 4. Can connect with computer(optional)
Max. Welding Wire Section Area	50mm²copper wire	70 mm² copper wire
Operation interface	7/10 inch touch screen
Welding hom	Imported heat treated tool steel
Automatic frequency range	±400HZ
Automatic frequency tracking accuracy	±5HZ
Power stability	≤5%
Weld timer setting	0.01 to 5.00 secs
Dynamic response time of remote terminal	≤10ms
Over current protection current	20A
Over current protection time	100ms
Overheat protection temperature	85°C
Working environment temperature	-5°C~+50°C
Dimension (L*W*H)	780 *570*1500 mm
Weight	145kg	155kg
Warranty	One year warranty with lifetime support

• Battery pack connection, aluminum sheet, copper busbar connection;
• Automobile wiring, wiring terminal, multiple wiring welding;
• Welding of wiring and electronic components, connectors, terminals;
• Welding of different metals such as Al Cu, Al Ni, Cu Ni, Ti Al, etc Copper pipe seals of refrigerators;
• Welding of Ni mesh, Al mesh, Ni foil, Cu Al foil, and solar board.